Copper wheel KCB gear pump is mainly used for transmission lubricants, lubrication system in a variety of machinery and equipment is suitable for conveying a viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt), temperature at 300 ° C The following lubrication oil. Mainly used to transport gasoline, diesel, benzene, alcohol, pesticides and other flammable and corrosive media. 
 KCB gear pump can be used as a transfer in the oil system, the booster pump; in the fuel system can be used as transportation, pressurized jet fuel pump; in all industrial areas may make the lubricating oil pump to use. 
 KCB gear pump gears, shaft, pump, safety valve, shaft seal is composed. Gear heat treated to high hardness and strength, and the shaft is installed with replaceable sleeve operation. Lubrication of all parts within the pump in the pump work output media automatically reach. 
 The pump design drain and return to the tank, minimum gear to withstand the torque force at work, so the bearing load, wear, high efficiency pump. 
 The pump has a safety valve as overload protection, the safety valve of the total reflux exclude pressure pump rated pressure of 1.5 times, can also be adjusted according to actual needs another allows the discharge pressure within. But pay attention to the safety valve can not make long-term work of the valve may be needed in the pipeline to be installed. Stretch from the spindle outer end to the pump rotation is clockwise. 
 Flow gear pump gear pump, the unloaded pump, fuel pump, the original pump, marine gear pump. 
 Flow: 1.1m3/h-600m3/h pressure: 0.28MPa - 2.5MPaKCB copper wheel gear pump 
 Mainly used for large flow of oil and oil fields, oil depots, ports, docks, ship unloading!