2CY series stainless steel gear pump is mainly used for the lubrication of various machinery and equipment in the oil delivery system for conveying a viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt), the temperature at 300 ℃ following a lubricating oil. Stainless steel gear pump, can transport non-lubricating oil, beverages, low-corrosive liquid. With low copper gear can be transported within a point liquids such as gasoline, benzene and so on. This series of pumps in addition to ordinary motor configuration, it can also be configured according to user specifications with explosion-proof motor. 
 ● Scope 
 Transmission system can be used in the oil, booster pump; 
 Can be used in the fuel system, transmission, compression, fuel injection pump; 
 In all industrial areas, can be used for lubricating oil pumps. 
 ● structural features 
 This series of gear pumps are gear, shaft, pump, safety valve, shaft seal formed. Gear heat treatment have a higher hardness and strength, together with the shaft sleeve mounted within the operation can be replaced. All parts of the lubrication pump are used in the pump work automatically to the output medium. 
 There are well-designed pump drain and return to tank is the gear in the work force to withstand the torque minimum, the bearing load is small, wear small, high efficiency pump. 
 Pump with overload protection as a safety valve, safety valve pressure pump rated full-back ruled out pressure of 1.5 times, but also allows the discharge pressure in the range of other adjustments according to actual needs. But note that the safety valve pressure relief valve can not be long-term work, when necessary, be installed in the pipeline. 
 Overhang from the spindle to the pump-side perspective, clockwise rotation. 
 High flow gear pumps, gear pumps, unloaded pump, fuel pump, the original pump, marine gear pumps. 
 Flow: 1.1m3/h-600m3/h pressure: 0.28MPa - 2.5MP. 
 Mainly used in oil fields, oil depots, ports, terminals, ships and other large flow of oil, offloading!